Painless Performance: GM 1986 - 1989 Tuned Port Fuel Injection Harness (MAF) Extra Length

Year: 1986 - 1989
Make: General Motors
Model: Camaro, Firebird, Corvette
Engine: 5.0L, 5.7L Tuned Port Injection w/ Mass Air Flow Meter
Trans.: 200-4R, 700-R4 and Other Non-Electronic

The GM Tuned Port Fuel Injection system this Painless Performance®™ harness operates is a perfect upgrade for those fed up with their carburetor fueled engine. Harness utilizes factory components listed in the next paragraph or see the actual part numbers in the installation manual.

For installations of 1986 - 1989 Tuned Port Injected 5.0L and 5.7L V8 engines using the Mass Air Flow system. These engines were factory equipped in Chevrolet Camaro and Corvette and were mated to either a 200-4R or 700-R4 transmission. Harness includes all needed connections for fuel injection operation: ECM, MAF, O2, TPS, ESC, IAC, IAT, CTS, Knock, Injectors, OBD1 w/SES light, VSS and TCC solenoid. This extra length harness allows eight feet from the back of the intake manifold to where the fuseblock and ECM mount. Perfect for those that plan to mount these components under or behind the passenger seat.

This kit includes:

All new fuel injection harness with OEM fitment connectors and harness breakouts.
OBDI connector, mounting bracket and check engine light.
Crimp on terminals and rubber grommet.
Mounting hardware.
Installation manual.

If you are not sure this is the right harness for your application. Click here.

Harness Length: 8 Feet Between Engine and ECM
Fuse Type: Blade
Firewall Passthrough: Grommet
Color Code Based: 1988 Chevrolet Camaro
Connectors Included: ECM, MAF, O2, TPS, ESC, IAC, IAT, CTS, Knock, Injectors, Distributor, OBD1 w/SES light, VSS and TCC solenoid.
Circuit Designations: Printed Wire Tags on all Connectors and Open Ended Wires

For full factory emission controls purchase Painless Performance®™ part number 60313. This emissions harness operates the charcoal canister, air port solenoid and the air pump diverter.

If you plan to mount the ECM under or behind the dash or in the glove box please see Painless Performance®™ part number 60102 as it provides 4 feet of harness length between the main engine breakout and the ECM connectors.